My Project

The Different Types of Joinery Involved In Woodworking Which Is Better for You

By [http://ezinearticles.com/?expert=David_Chett]David Chett
Joinery woodworking refers to joining two pieces of wood together, mostly to form corners with wood. The appearance and the strength of a joint tell wonders about the overall skill of the woodworker. When dealing with joinery in woodworking, we find different types of joints, each specific to certain types of application. Learning and effectively apply these joints draw you closer to mastering the art of woodworking. Below are the different types of joints:
Basic Butt - The Basic Butt Join is the simplest type of joint. This type of joint is formed when two pieces of wood are put together to make a right angle. You often find this joint in construction but is not an attractive option when building furniture or fine woodworking.
Mitered Butt - Just as the name suggest; a Mitered Butt Joint is formed when a miter angle is completed. While not the strongest type of joint, it is very much aesthetically pleasing.
Mortise and Tenon - Like the Basic Butt Joint, the Mortise and Tenon Joint also connect two pieces of wood to form a right angle. This is completed by placing a piece of wood with a rectangular pin cut from its end (the tenon) and is inserted into another cutout slow (the mortise).
Tongue and Groove - The Tongue and Groove Joint is slightly stronger than the Basic Butt Joint and instead of using to form right angles, is used to piece together pieces end to end. It involves one piece of wood that has a protruding tab (known as the tongue) and is fitted with another piece of wood.
Dado - The Dado is highly similar to the Tongue and Groove Joint. You find a grooved slot created at the end of one board where another board fits into place. The Dado Joint is mostly found when working with plywood.
Rabbet - Like the Dado Joint, the Rabbet joint is also popular when working with plywood and cabinetry. The rabbet join connects to a back board with four side boards which forms a box.
Through Dovetail- When participating in woodworking, understand that the Through Dovetail Joint has become the preferred joinery technique. This is where a series of tabs along the edge of one board are fitted together to form slots. This forms an extremely strong joint and is often used with furniture.
Half-Blind Dovetail- This joint is similar to the Through Dovetail Joint in that this joint also uses a series of slots to connect the pieces of wood together. When working with the Half-Blind Dovetail, there is one side of wood which hides the joints.
Sliding Dovetail- This joint is commonly used when making a drawer assembly. It works in line with the Dado Joint but is more secure than the Dado Joint. Keep this in mind when dealing with both joints.
Biscuit- The Biscuit Joint, like the tongues and groove joint is used to connect wood end-to-end. With this joint, a crescent shaped hole is cut into the edges of both pieces of wood. After this is completed, an oval of compressed wood is then glued to the slots followed by clamping the joint. The glue will cause the biscuit to swell up which secures the joint.
Want to learn about where to [http://www.answersforwoodworking.com/where-to-buy-wood-for-woodworking/]buy wood for woodworking? Visit my website at [http://www.answersforwoodworking.com]Answers for Woodworking for helpful tips and information on woodworking.
Article Source: [http://EzineArticles.com/?The-Different-Types-of-Joinery-Involved-In-Woodworking---Which-Is-Better-for-You?&id=6672089] The Different Types of Joinery Involved In Woodworking - Which Is Better for You?